AudioCodes Mediant 1000 User Manual page 272

•
EV_MFRn_10 - MF digit 10 is detected.
•
EV_MFRn_11 - MF digit 11 is detected.
•
EV_MFRn_12 - MF digit 12 is detected.
•
EV_MFRn_13 - MF digit 13 is detected.
•
EV_MFRn_14 - MF digit 14 is detected.
•
EV_MFRn_15 - MF digit 15 is detected.
•
EV_MFRn_1_STOPPED - MF digit 1 previously detected, is now stopped.
•
EV_MFRn_2_ STOPPED - MF digit 2 previously detected, is now stopped.
•
EV_MFRn_3_ STOPPED - MF digit 3 previously detected, is now stopped.
•
EV_MFRn_4_ STOPPED - MF digit 4 previously detected, is now stopped.
•
EV_MFRn_5_ STOPPED - MF digit 5 previously detected, is now stopped.
•
EV_MFRn_6_ STOPPED - MF digit 6 previously detected, is now stopped.
•
EV_MFRn_7_ STOPPED - MF digit 7 previously detected, is now stopped.
•
EV_MFRn_8_ STOPPED - MF digit 8 previously detected, is now stopped.
•
EV_MFRn_9_ STOPPED - MF digit 9 previously detected, is now stopped.
•
EV_MFRn_10_ STOPPED - MF digit 10 previously detected, is now stopped.
•
EV_MFRn_11_ STOPPED - MF digit 11 previously detected, is now stopped.
•
EV_MFRn_12_ STOPPED - MF digit 12 previously detected, is now stopped.
•
EV_MFRn_13_ STOPPED - MF digit 13 previously detected, is now stopped.
•
EV_MFRn_14_ STOPPED - MF digit 14 previously detected, is now stopped.
•
EV_MFRn_15_ STOPPED - MF digit 15 previously detected, is now stopped.
•
EV_END_OF_MF_DIGIT - When using DialMF() and no more dialed number
digits are available. (They already have been sent. For example, the far side
requests the next ANI digit, but all digits already have been sent). This event
usually appears in MFR2 tables.
•
EV_NO_ANI - When using DialMF() and no ANI was specified by the outgoing
user in the acPSTNPlaceCall() function. (MFCR2 protocols specifications should
define what to do when no ANI digits are available. Usually I-12 is sent).
Note:
•
EV_ACCEPT - When using acCASAcceptCall (used only in MFC/R2) with
CALLED_IDLE as its reason parameter.
•
EV_REJECT_BUSY - When using acCASAcceptCall with CALLED_BUSY as its
reason parameter.
•
EV_REJECT_CONGESTION - When using acCASAcceptCall with
CALLED_CONGESTION as its reason parameter.
•
EV_REJECT_UNALLOCATED - When using acCASAcceptCall with
CALLED_UNALLOCATED as its reason parameter.
•
EV_REJECT_RESERVE1 - When using acCASAcceptCall with
CALLED_RESERVE1 as its reason parameter.
User's Manual
MF digit is MF R1 or R2-FWD or R2-BWD according to the context, protocol
type and call direction.
272
Digital Mediant 1000
Document # LTRT-66401