User's Manual
The following parameters are used for both the VLAN and MI features.
Parameter Name
EnableDNSasOAM
EnableNTPasOAM
EnableSCTPasControl
EnableTPNCPasOAM
Version 4.6
19. Appendix - Getting Started with VLANs and IP Separation
Table 19-4: Shared VLAN and MI Parameters
Default
Range
Value
1
Enable = 1
Disable = 0
1
Enable = 1
Disable = 0
1
Enable = 1
Disable = 0
1
Enable = 1
Disable = 0
For MI: If enabled, the DNS services
are on the OAM network. If disabled,
they are on the Control network
For VLANS: If enabled, the DNS
services are on the OAM VLAN. If
disabled, they ar on the Control VLAN
For MI: If enabled, NTP services are on
the OAM network. If disabled, they are
on the Control network
For VLANS: If enabled NTP services
are on the OAM VLAN. If disabled, they
are on the Control VLAN
For MI: If enabled, SCTP services are
on the Control network. If disabled,
they are on the OAM network
For VLANS: If enabled, SCTP services
are on the Control VLAN. If disabled,
they are on the OAM VLAN.
For MI: If enabled, TPNCP services are
on the OAM network. If disabled, they
are the Control network
For VLAN: If enabled, TPNCP services
are on the OAM VLAN. If disabled, they
are on the Control VLAN.
325
Comments
August 2005