configuration of trap destinations and trusted managers only.
SNMP Research International enterprise MIBs - The Mediant 1000 supports two
SNMP Research International MIBs: SR-COMMUNITY-MIB and TGT-ADDRESS-
MASK-MIB. These MIBs are used in configuration of SNMPv2c community strings and
trusted managers.
In addition to the standard MIBs, the complete product series contains several proprietary
MIBs:
AcBoard MIB - This proprietary MIB contains objects related to configuration of the
board and channels as well as to run-time information. Through this MIB, users can
set up the board configuration parameters, reset the board, monitor the board's
operational robustness and quality of service during run-time and receive traps.
Note:
The AcBoard MIB has the following Groups:
•
boardConfiguration
•
boardInformation
•
channelConfiguration
•
channelStatus
•
reset
•
acTrap
As noted above, new AudioCodes proprietary MIBs cover the general parameters in the
board.
They each contain a Configuration subtree, for configuring the related parameters. In some
there also are Status and Action subtrees.
The new AudioCodes proprietary MIBs are:
acControl MIB
acMedia MIB
acPSTN MIB
acSystem MIB
User's Manual
The AcBoard MIB is being phased out. It is still supported, but it is being
replaced by an updated proprietary MIBs.
122
Digital Mediant 1000
Document # LTRT-66401