Channel Configuration; Advanced Configuration; Figure 8-7: Channel Configuration Screen (Megaco) - AudioCodes Mediant 1000 User Manual

8.5.4

Channel Configuration

To configure the Channel Configuration take these 4 steps:
From the main menu list on the left, click on the Protocol Management link. The
1.
Protocol Selection screen appears.
From the sub-menu bar on the top, click the Channel Configuration link. The
2.
Channel Configuration screen appears.

Figure 8-7: Channel Configuration Screen (MEGACO)

Use the appropriate tables in the Appendix, ''Individual 'ini' File Parameters'' on page
3.
207 as a reference when configuring/modifying the Channel Configuration parameter
fields in the 'Channel Configuration' screen.
After configuring/modifying the parameter fields, click the SUBMIT button. The
4.
changes are entered into the system and the screen is refreshed.
8.5.5

Advanced Configuration

To configure the Advanced Configuration take these 4 steps:
From the main menu list on the left, click on the Protocol Management link. The
1.
Protocol Selection screen appears.
User's Manual 146
Digital Mediant 1000
Document # LTRT-66401