User's Manual
8.5.1
Protocol Selection
To select the protocol type, take these 2 steps:
From the main menu list on the left, click on the Protocol Management link. The
1.
Protocol Management screen appears.
Click the radio button of the desired protocol.
2.
Note:
Version 4.6
Figure 8-4: Protocol Management Screen
Changing the protocol type requires a device reset. When you have
completed configuring the desired parameters, the Mediant 1000 must be
reset using the Reset screen (refer to ''Reset Button'' on page 184) for the
changes to be implemented.
143
8. Mediant 1000 Management
August 2005