Table of Contents
Advertisement
Parameter
Outbound IP Routing Table
[Prefix]
1.12.1.2 SIP Gateway Parameters
The table below describes the SIP Gateway parameters from the previous release that
have been modified in Release 6.2.
Table 1-12: Modified SIP Gateway Parameters for Release 6.2
Parameter
Automatic Dialing Table
[TargetOfChannel]
Tone Index Table
[ToneIndex]
SIP Release Notes
Modification: PREFIX_DestSRD added.
This ini file table parameter configures the Outbound IP Routing table
for routing Tel-to-IP and IP-to-IP calls. The format of this parameter is
as follows:
[PREFIX]
FORMAT PREFIX_Index = PREFIX_DestinationPrefix,
PREFIX_DestAddress, PREFIX_SourcePrefix, PREFIX_ProfileId,
PREFIX_MeteringCode, PREFIX_DestPort, PREFIX_SrcIPGroupID,
PREFIX_DestHostPrefix, PREFIX_DestIPGroupID,
PREFIX_SrcHostPrefix, PREFIX_TransportType,
PREFIX_SrcTrunkGroupID, PREFIX_DestSRD;
[\PREFIX]
Modification: HotLineToneDuration parameter added (MP-1xx,
Mediant 600, Mediant 1000, Mediant 1000 MSBG).
[TargetOfChannel]
FORMAT TargetOfChannel_Index = TargetOfChannel_Destination,
TargetOfChannel_Type, TargetOfChannel_HotLineToneDuration,
TargetOfChannel_Module, TargetOfChannel_Port;
[\TargetOfChannel]
Where:
HotLineToneDuration = defines the timeout per port (channel) for
automatic dialing when the Hotline feature is enabled. If the phone
(connected to the specific port) is off-hooked and no digit is pressed
for this user-defined duration (timeout), the device automatically
initiates a call to the user-defined destination phone number. This
parameter has a valid value range of 0 to 60 seconds, with default
as 16.
Modification: ToneIndex_DestinationPrefix parameter added (MP-
1xx, Mediant 600, Mediant 800 MSBG, Mediant 1000 MSBG, Mediant
1000).
[ToneIndex]
FORMAT ToneIndex_Index = ToneIndex_FXSPort_First,
ToneIndex_FXSPort_Last, ToneIndex_SourcePrefix,
ToneIndex_DestinationPrefix, ToneIndex_PriorityIndex;
[\ToneIndex]
Where:
DestinationPrefix = destination (called) number (or prefix) for
associating a distinctive ringing pattern and call waiting tone for IP-
to-Tel calls (FXS interfaces).
104
CPE SIP Products
Description
Description
Document #: LTRT-26901
Advertisement
Table of Contents
