Note:
1
2
Item #
1
RJ-45 connector as 10/100 Base-TX Ethernet port
2
Ethernet activity LED (yellow)
3
Ethernet link LED (green)
RJ-11 connector used for night bell relay output. The pinout of this connector is
4
described in Figure 2-9.
RJ-11 connector (voice + PTT control) used for paging output. The pinout of this
5
connector is described in Figure 2-10.
6
General purpose LED
7
Second HDD Activity LED
8
First HDD Activity LED
9
SBC power LED
10
Reset switch
11
3.5 mm stereo mini jack connector used as music on hold input
User's Manual
The iPMX module includes a backup battery that is responsible for
retaining the CMOS setup configuration. The battery lasts for 18 months of
non-operating conditions. When empty (the CMOS configuration returns to
its default). Replace with Lithium battery model CR-1225.
Figure 2-8: iPMX Module
4
6
3
Table 2-6: iPMX Module Component Descriptions
Component Description
5
10
9
7
8
34
Digital Mediant 1000
11
Document # LTRT-66401