AudioCodes Mediant 1000 User Manual page 239

User's Manual
ini File Field Name
DTMFDigitLength
DTMFInterDigitInterval
EnableCallerIDTypeTwo
EndpointName
EndpointPrefix
GatewayName
Version 4.6
Table 12-5: Common Control Parameters
Description
MEGACO, it's the start timer. For the
rest, it's the end timer.
Defines the time to play DTMF, in
msec.
Defines the time between DTMFs
played, in msec.
Enables or disables Caller ID Type 2.
If Off (0), Caller ID Type Two is not
played (if playing is requested from
the Call Agent).
0 = Off; 1 = On
MGCP: Gateway's endpoint name.
This is a prefix used to identify the
endpoint, i.e. 'ACgw' in the following
example:
'ACgw5@acl.com'.
MEGACO: Prefix of the endpoint part
of the termination name
Range: String[19]
Default:
MGCP: 'Acgw'
MEGACO: 'line' for analog board and
'/c' for trunking boards
(MGCP) This parameter generates
(together with parameter Trunk Name)
a local endpoint name on trunk-
enabled media gateways.
Range: String[19]
Defines the media gateway's
identification name.
MGCP: Gateway's identification name
towards the MGCP Call Agent. If
undefined, the gateway name holds
the IP address of the board.
MEGACO: Prefix of the gateway part
of the termination name.
Range: String[63]
Default:
MGCP: AudioCodes.com
MEGACO: NULL for analog boards
and 'tgw' for trunking boards
239
12. Appendix - Individual ini File Parameters
Host/Manual
Default Value
100
100
See Descr.
NULL
See Descr.
Valid
Range
0 to 65535
0 to 65535
1 0 or 1
See Descr.
See Descr.
See Descr.
August 2005