AudioCodes Mediant 1000 User Manual page 221

User's Manual
ini File Field Name
RFC2833RxPayloadType
RFC2833TxPayloadType
RTPRedundancyDepth
SITDetectorEnable
TestMode
UserDefinedToneDetector
Enable
V22ModemTransportType
V23ModemTransportType
V32ModemTransportType
Version 4.6
Table 12-2: Media Processing Parameters
Description
Controls the RFC 2833 Rx Relay
RTP Payload type.
Controls the RFC 2833 Tx Relay
RTP Payload type.
Enables or disables generation of
RFC 2198 redundancy packets.
0 = Disable; 1 = Enable
Enables or disables SIT (Special
Information Tone) detection
according to the ITU-T
recommendation E.180/Q.35.
0 = Disable; 1 = Enable
Defines the type of testing mode
applied:
0 = Coder Loopback performs an
encoder/decoder loopback inside the
DSP device
1 = PCM Loopback loops back an
incoming PCM to the outgoing PCM.
2 = ToneInjection generates a 1000
Hz tone to the outgoing PCM
3 = NoLoopback sets the channel to
work in normal mode
Enables or disables detection of User
Defined Tones signaling.
0 = Disable; 1 = Enable
Sets the V.22 modem transport
method.
0 = Transparent
2 = Bypass
3 = Transparent with Events
Sets the V.23 modem transport
method.
0 = Transparent
2 = Bypass
3 = Transparent with Events
Sets the V.32 modem transport
method.
0 = Transparent
221
12. Appendix - Individual ini File Parameters
Host/Manual
Default Value
96
96
Valid
Range
96 to 127
96 to 127
0 0 or 1
0 0 or 1
3 0 to 3
0 0 or 1
2 0 to 3
2 0 to 3
2 0 to 3
August 2005