AudioCodes Mediant 1000 User Manual page 242

ini File Field Name
TransactionIDBase
TransactionIDRange
TransparentCoderPayload
Type
TrunkName
USETransparentCoder
WithHBR
User's Manual
Table 12-5: Common Control Parameters
Description
sent.
If set to 1 and the channel was
opened or modified to operate with the
G.729 coder with Silence Suppression
when Silence is detected, only a
single SID packet is sent.
If set to 0, SID packets are sent
frequently, according to energy
changes that require a SID packet for
each change.
Defines the minimum number for the
transaction ID.
Defines the range for the transaction
ID.
Default = 999999999
Alternative payload type to use as
transparent coder.
(MGCP) This parameter generates
(together with the parameter defining
the Endpoint Prefix) a local endpoint
name on trunk-enabled media
gateways.
(MEGACO) Prefix of the trunk part of
the termination name.
Range: String[19]
Default:
MGCP = ' ' (empty string)
MEGACO = ' ' for analog boards and
's' for trunking boards
If this parameter is set to 1 and the
connection uses HBR (High Bit Rate)
coders, the DTMF transport type is set
to Transparent.
Coders list:
G711A-law_64, G711 µ-law,
G726_16, G726_24, G726_32,
G726_40, G727_16, G727_24_16,
G727_24, G727_32_16, G727_32_24,
G727_32, G727_40_16, G727_40_24,
G727_40_32.
0 = Do not use; 1 = Use
242
Digital Mediant 1000
Host/Manual Valid
Default Value Range
2000 > 0
See Descr. > 0
116 0 to 127
See Descr. See Descr.
0 0 or 1
Document # LTRT-66401