Connecting The Audio In/Out Cable; Figure 3-5: Audio Cable And In/Out Rca Connectors; Table 3-2: Audio Levels - AudioCodes Mediant 1000 User Manual

4.
5.
3.1.4.3

Connecting the Audio IN/OUT Cable

The audio cable (refer to
standard color-coded red RCA connector for IN (Input) and the other is a standard color-
coded black RCA connector for OUT (Output). Connect the red RCA input connector to
your music-on-hold system, and connect the black RCA output connector to your
loudspeaker to enable paging.
Audio IN Level
Audio OUT Level

Figure 3-5: Audio Cable and IN/OUT RCA Connectors

4
Not currently supported. Contact AudioCodes regarding availability.
User's Manual
Connect two additional wires into the mate's spring-cage connections in
position 2 and 1 (represented by label II in Figure 2-1) (refer also to Figure
3-4).
During normal operation, dry contact labeled II is closed. If a malfunction
occurs, dry contact labeled II opens.
Connect the other ends of the dry contact wiring to the alerts (alarm, siren or
light) according to your preferences and requirements.
Figure 3-5

Table 3-2: Audio Levels

The audio IN level must be below the AC signal 2V PTP (peak-to-
peak).
The audio OUT level is variable but must not exceed 3V PTP.
4
below) splits into two RCA connectors; one is a
42
Digital Mediant 1000
Document # LTRT-66401