AudioCodes Mediant 1000 User Manual page 240

ini File Field Name
IPDiffServ
IPPrecedence
IPTOS
KeepAliveEnabled
KeepAliveInterval
MGControlProtocolType
MGCPCommunicationLayer
Timeout
MGCPCompatibilityProfile
MGCPDefaultCoder
MGCPDefaultPacketization
Period
User's Manual
Table 12-5: Common Control Parameters
Description
Defines the value of the 'DiffServ' field
in the IP header for media (RTP)
traffic.
Sets the value of the IP precedence
field in the IP header for all packets
generated from the channel.
Sets the value of the parameter
defining IP Type Of Service (TOS) in
the IP header for all packets
generated from this channel.
This parameter can be used to enable
a KeepAlive message (NOP
ServiceChange).
0 = disable; >0 = enable
This parameter is used to define the
interval in seconds of a KeepAlive
message.
Defines the control protocol type.
Choose either:
0 = None
1 = MGCP
2 = MEGACO
4 = H.323
8 = SIP
This parameter defines the maximal
time to wait for a response before
declaring a disconnection (in
seconds).
ControlS MGCP/MEGACO functioning
for vendor-specific compatibility. Refer
to the product's User's Manual.
Range: Integer > 0
Refer to the product's User's Manual
or the enumerator mgTMGCPProfile
for possible values.
This parameter can be used to set a
default coder for channel opening. For
the legal coder names, refer to the
product's User Manual.
Default = cpDPT_G711µ-law_Coder
Defines the default packetization
period (Frame Size).
240
Digital Mediant 1000
Host/Manual Valid
Default Value Range
0 0 to 63
0 0 to 7
0 0 to 15
0 0 or >0
12 1 to 300
1 0 to 8
30 >0
1 See Descr.
G.711 See Descr.
20 5 to 120
Document # LTRT-66401