AudioCodes Mediant 1000 User Manual page 277

User's Manual
Each reason generates a specific action, defined by the User, who modifies the script
file. The action is then used to generate/respond with a group B MF (free, busy, etc.).
Transfer Capability - This parameter of acPSTNPlaceCAll() function is used by the
outgoing register to generate the service nature of the originating equipment. In most
variants (countries) this is the same as the Calling Subscriber Categories but in some
countries it is different, such as in R2 china protocol, it is referred to as the KD (Group
II) digit.
Note:
Source Category - This parameter of acPSTNPlaceCall() function determines the
calling subscriber category. For example: subscriber with priority, subscriber without
priority etc. This parameter is usually sent as part of the Group II forward digits (except
for R2 china where it is sent as the KA digit using Group I forward digits).
Note:
Version 4.6
This parameter only
acTISDNTransferCapability enumerator. Choose the MF digit according to
the service type that should be sent.
Applicable only to MFC-R2 protocol type.
15. Appendix - CAS Protocol Table
receives the
277
MF values from
August 2005
the