Pull the fan tray unit outward.
2
extracted.
With your fingertips, grasp the steel frame of the air filter and separate it from the fan
3
try unit; you should be able to remove it relatively easily.
filter extracted from the fan try unit.
Take one of the following steps:
4
If you are cleaning the filter, use a vacuum cleaner (on light suction) to remove
dust particles from the filter.
Alternatively, if you are replacing the filter, discard the old air filter and replace it
with an air filter purchased from AudioCodes.
User's Manual
Figure 2-4
Figure 2-4: Slightly Extracted Fan Try Unit
Figure 2-5: Fan Try with Filter Extracted
30
below shows the fan try unit slightly
Figure 2-5
Document # LTRT-66401
Digital Mediant 1000
below show the air