User's Manual
Alarm:
OID:
Default Severity
Event Type:
Probable Cause:
Alarm Text:
Status Changes:
Condition:
Trap status:
Note:
Table 20-6: acPerformanceMonitoringThresholdCrossing Log Trap
Alarm:
OID:
Default Severity
Event Type:
Probable Cause:
Alarm Text:
Status Changes:
Condition:
Trap status:
Condition:
Trap status:
20.3
Other Traps
The following are provided as SNMP traps and are not alarms.
Version 4.6
Table 20-5: acKeepAlive Log Trap
acKeepAlive
1.3.6.1.4.1.5003.9.10.1.21.2.0.16
Indeterminate
other (0)
other (0)
Keep alive trap
The STUN client in the board is enabled and has either identified a NAT or is
not finding the STUN server
The ini file contains the following line: 'SendKeepAliveTrap=1'
Trap is sent
Keep-alive is sent out every 9/10 of the time defined in the
NatBindingDefaultTimeout parameter
acPerformanceMonitoringThresholdCrossing
1.3.6.1.4.1.5003.9.10.1.21.2.0.27
Indeterminate
other (0)
other (0)
"Performance: Threshold alarm was set ", with source = name of
performance counter which caused the trap
A performance counter has crossed the high threshold
Indeterminate
A performance counter has crossed the low threshold
cleared
331
20. Appendix - SNMP Traps
August 2005