AudioCodes Mediant 1000 User Manual page 249

User's Manual
ini File Field Name
UseProductName
UserProductName
UseWeblogo
WebAccessList
WebLogoText
WebRADIUSLogin
Version 4.6
Table 12-7: Web Parameters
Description
Activates the userProductName
parameter.
1 = On = Enables the
userProductName string to override
any AudioCodes defaults.
0 = Off = userProductName string
has no effect on the product name.
A string of characters to replace the
default AudioCodes product name
appearing in the upper right hand
corner of the device web interface
pages.
Range = String[29]
Enables the webLogoText string to
override any loaded logo image file.
1 = Enables the webLogoText string
to override any loaded logo image file
(and AudioCodes default logo
image).
0 = The webLogoText string will have
no effect on the logo image.
Allows IP addesses to connect to the
Web interface. Set to zeroes to allow
all IP addresses.
Range = Valid IP address
Replaces the default AudioCodes
logo image, appearing in the upper
left hand corner of the device web
interface pages, with a text string.
Range = String[15]
Note: This string also replaces the
AudioCodes name in the title bar.
Uses RADIUS (Remote
Authentication Dial-In User
Server/Service) queries for Web
interface authentication.
Make sure that ENABLERADIUS is
on.
Use of this parameter without
HTTPSONLY = 1. The combination
of webradiuslogin=1 and httpsonly=0
is not recommended, although it's a
valid combination.
249
12. Appendix - Individual ini File Parameters
Host/Manual
Default Value
NULL
0.0.0.0
NULL
Valid
Range
0 0 or 1
See Descr.
0 0 or 1
See Descr.
See Descr.
0 0 or 1
August 2005