Cdrh Requirements; Handling The Laser Scanner Unit - Canon iR1200 Series Service Manual

1.1.5.2 CDRH Requirements

The Center for Devices and Radiological Health (CDRH) of the US Department of Health and Human Services put
into force a set of requirements with a view to regulating laser-related products on August 2, 1976. The requirements
apply to laser products produced on August 1, 1996, or later, and all laser products must comply with them if they
are to be marketed in the US. The following is the label that indicates the compliance with the CDRH requirements,
and it must be attached to all laser products that are sold in the US.
The text may differ from product to product or from model to model.

1.1.5.3 Handling the Laser Scanner Unit

When servicing the area around the machine's laser scanner unit, take full care not to put any tool with a high
reflectance (e.g., screwdriver) into the laser path. Be sure also to remove any watch, ring, or the like, as they can
reflect the laser beam to damage your eye. The machine's laser light is red, and its covers that can reflect the laser
beam are identified using the following label. The laser scanner unit of this model cannot be adjusted in the field.
F-1-15
Chapter 1
0006-2833
0006-2834
1-43