EdgeSwitch CLI Command Reference
Logging Commands
This section describes the commands used to configure system logging, and to view logs and logging settings .
logging buffered
This command enables logging to an in-memory log that keeps up to 128 logs .
Default
disabled; critical when enabled
logging buffered
Format
Mode
Global Config
no logging buffered
This command disables logging to in-memory log .
no logging buffered
Format
Mode
Global Config
logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full capacity . Otherwise when
the log file reaches full capacity, logging stops .
Default
enabled
logging buffered wrap
Format
Mode
Privileged EXEC
no logging buffered wrap
This command disables wrapping of in-memory logging and configures logging to stop when the log file
capacity is full .
no logging buffered wrap
Format
Mode
Privileged EXEC
logging cli-command
This command enables the CLI command logging feature, which enables the EdgeSwitch software to log all CLI
commands issued on the system .
Default
enabled
logging cli-command
Format
Mode
Global Config
no logging cli-command
This command disables the CLI command Logging feature .
no logging cli-command
Format
Mode
Global Config
logging host
This command configures the logging host parameters . You can configure up to eight hosts .
port: 514
Default
severitylevel: critical (2)
logging host {hostaddress|hostname} addresstype {port severitylevel}
Format
Mode
Global Config
Ubiquiti Networks, Inc.
Utility Commands
126