Chapter 8: Alerts Tab; Alert Log - Ubiquiti TouchSwitch TS-5-POE User Manual

TOUGHSwitch PoE User Guide
™

Chapter 8: Alerts Tab

The Alerts tab displays logs registering alerts or system
events.
The TOUGHSwitch image displays the active LEDs and
connections. See "Hardware Overview" on page 1
for more information.
Total Throughput for TX and RX are also displayed.
Place your mouse over a port to view its PoE status,
Speed setting, duplex mode, and statistics for TX and RX
throughput.
Ubiquiti Networks, Inc.

Alert Log

When alerts logging is configured on the Ports tab (see
"Configure Alerts for Port" on page 25), the Alert Log
lists all alerts. By default, alert logging is disabled.
Port To display entries for all ports, select All. To display
entries for a specific port, select the port number from the
drop-down list.
When alerts logging is enabled, the Select All and Clear
Selected buttons are available:
Select All To select all entries in the Alert Log, click Select
All.
Clear Selected
To delete specific entries in the Alert Log,
select those entries and then click Clear.
Refresh To update the log content, click Refresh.
Search Allows you to search for specific text. Begin
typing; there is no need to press enter. The results are
filtered in real time as soon as you type two or more
characters.
Entries in the Alert Log include the Port number, Date, and
Message.
Chapter 8: Alerts Tab
28