EdgeSwitch CLI Command Reference
DHCP Client Commands
The EdgeSwitch can include vendor and configuration information in DHCP client requests relayed to a DHCP
server . This information is included in DHCP Option 60, Vendor Class Identifier . The information is a string of
128 octets .
dhcp client vendor-id-option
This command enables the inclusion of DHCP Option-60, Vendor Class Identifier included in the requests
transmitted to the DHCP server by the DHCP client operating in the EdgeSwitch .
dhcp client vendor-id-option string
Format
Mode
Global Config
no dhcp client vendor-id-option
This command disables the inclusion of DHCP Option-60, Vendor Class Identifier included in the requests
transmitted to the DHCP server by the DHCP client operating in the EdgeSwitch .
no dhcp client vendor-id-option
Format
Mode
Global Config
dhcp client vendor-id-option-string
This parameter sets the DHCP Vendor Option-60 string to be included in the requests transmitted to the DHCP
server by the DHCP client operating in the EdgeSwitch .
dhcp client vendor-id-option-string string
Format
Mode
Global Config
no dhcp client vendor-id-option-string
This parameter clears the DHCP Vendor Option-60 string .
no dhcp client vendor-id-option-string
Format
Mode
Global Config
show dhcp client vendor-id-option
This command displays the configured administration mode of the
string to be included in Option-43 in DHCP requests .
show dhcp client vendor-id-option
Format
Mode
Privileged EXEC
Example: The following shows example CLI display output for the command .
(UBNT EdgeSwitch) #show dhcp client vendor-id-option
DHCP Client Vendor Identifier Option is Enabled
DHCP Client Vendor Identifier Option string is EdgeSwitchClient.
Ubiquiti Networks, Inc.
Switching Commands
vendor-id-option
and the vendor-id
274