Retrofitting The Height-Adjustable Control Panel Holder - Otto Bock C2000 Service Instructions Manual

1
figure 91 Installing the detachable control panel holder

6.19.5 Retrofitting the Height-Adjustable Control Panel Holder

An optional special control panel holder can be mounted on the power wheelchair, allowing the
height of the control panel to be adjusted.
Tools:
❒ Allen wrench, size 3
❒ Allen wrench, size 5
Steps:
1. Attach the height-adjustable control panel holder to the underside of the arm rest with three
set screws.
2. Loosen two mounting screws and adjust the height of the control panel.
figure 92 Height-adjustable control panel holder
2 3
87