Otto Bock C2000 Service Instructions Manual page 46

figure 35 Removing the rear lights, rear-wheel drive
b) Removing the rear lights, front-wheel drive
Preparation:
❒ Remove the battery case cover (see Section 6.3.2).
Tools:
❒ Allen wrench, size 5
❒ Open-end or combination wrench, size 10
Steps:
1. Disconnect the connection between the rear lighting and the controller in the battery case.
2. Open the cable ties along the connection cable up to the connection to the controller.
3. Loosen and remove two Allen head screws per rear lighting element.
4. Remove the light including the light holder and replace if required.
Properly reassemble all components upon completion of the work.
figure 36 Removing the rear lights, front-wheel drive
46