Installing The Contour Seat (Optional); Installing The Recaro® Seat (Optional) - Otto Bock C2000 Service Instructions Manual

6.13.17 Installing the Contour Seat (Optional)

The optional contour seat is attached to the seat plate with hook and loop straps. You can mount
the contour seat on the frame of the standard seat.
Tools:
❒ Allen wrench, size 3
Steps:
1. Set the seat bottom with hook and loop straps onto the seat plate and press it into place.
2. Remove the back upholstery.
3. Slip three mounting clamps for the back of the contour seat onto the right and left of the
frame, respectively.
4. Put the seat back in place and mount it with six Allen head screws.
Properly reassemble all components upon completion of the work.
figure 64 Contour seat with clamp fittings
1 Frame for back rest
2 Contour seat back rest
3 Mounting clamp (6 pieces)
6.13.18 Installing the Recaro® Seat (Optional)
figure 65 C2000 power wheelchair with Recaro® seat
1
2
3
65