Otto Bock C2000 Service Instructions Manual page 44

b) Replacing the halogen lamp, front lighting:
1. Fold the pane forward with slight pressure on the black locking lever at the lower end of
the lamp.
2. Remove the pane with the attached halogen lamp.
3. Replace the defective halogen lamp with a new one.
4. Reinstall the pane.
Properly reassemble all components upon completion of the work.
figure 33 Replacing the halogen lamp, front lighting
c) Replacing the lamp, front direction indicator
1. Insert a narrow flat screwdriver into the recess on the direction indicator light housing, pry
open the pane and fold it down.
2. Remove the pane.
3. Slightly rotate the defective lamp to release it from the lock on the lamp socket, pull it out
and replace it.
Properly reassemble all components upon completion of the work.
44