Seat Module - Otto Bock C2000 Service Instructions Manual

8.3 Seat module
The controller is attached to the wheelchair with two screws (see Section 6.7/6.14.4).
1
3
figure 110 Seat module connection schemata
1 IN-A, IN-B, IN-C, IN-D, IN-E connections
2 RSW
3 A1 - A5 connections (actuators A1 - A5)
4 BUS connection
5 BUS connection
6 BATT bridge / external supply connection
7 12 V DC (connection must be activated by parameter -> On/Off!)
104
2
4 5 6 7