Steering Motor; Steering Potentiometer - Otto Bock C2000 Service Instructions Manual

4. Adjust the toothed wheel position / chain tension by turning the corresponding adjustment
nuts until directional stability is established.
1
figure 27 front adjustment nut (1) / rear adjustment nut (2)
5. Retighten the mounting screws (M8x40) for the toothed wheels.
Properly reassemble all components upon completion of the work.

6.10.2 Steering motor

CAUTION
Risk of accidents and injury due to improper completion of work on the steering motor. An incor-
rectly installed and / or adjusted steering motor can lead to steering system malfunctions. The removal
and installation of the steering motor, including all adjustment tasks, may only be completed at the plant
of Otto Bock Manufacturing Königsee GmbH.

6.10.3 Steering Potentiometer

CAUTION
Risk of accidents and injury due to improper completion of work on the steering potentiometer. An
incorrectly installed and / or adjusted steering potentiometer can lead to steering system malfunction.
The removal and installation of the steering potentiometer, including all adjustment tasks, may only be
completed at the plant of Otto Bock Manufacturing Königsee GmbH.
38
2