6.8.5 Removing the Drive Wheel Splash Guard
Preparation:
❒ Remove the drive wheel (see Section 6.8.2).
Tools:
❒ Allen wrench, size 4
❒ Open-end or combination wrench, size 10
Steps:
1. Loosen and remove the six Allen head screws.
2. Remove the splash guard and replace if required.
Properly reassemble all components upon completion of the work.
figure 20
Removing the drive wheel splash guard
6.8.6 Removing the Steering Caster Splash Guard
Preparation:
❒ Remove the steering caster (see Section 6.8.3).
Tools:
❒ Allen wrench, size 3
Steps:
1. Loosen and remove the three Allen head screws.
2. Remove the splash guard and replace if required.
Properly reassemble all components upon completion of the work.
33