S Tandard And Contour Seat: Replacing; Adjusting The Side Panel Attachment Device - Otto Bock C2000 Service Instructions Manual

figure 58 Adjusting the clothing protector
6.13.13 Standard and Contour Seat: Replacing / Adjusting the Side Panel Attachment
Device
The attachment device is located on either side on the rear cross brace under the seat.
Tools:
❒ Allen wrench, size 4
Steps:
1. Loosen the two set screws.
2. Remove the side panel attachment device and replace or readjust as required.
Properly reassemble all components upon completion of the work.
figure 59

Adjusting the side panel attachment device

1 Side panel attachment device
1
61