Retrofitting Attendant Controls - Otto Bock C2000 Service Instructions Manual

6.19.6 Retrofitting Attendant Controls

figure 93 Attendant controls
a) Installation on the standard or contour seat
Attendant controls are delivered as an installation kit. On the power wheelchair with the standard
or contour seat, they are attached to cross tube on the back rest. Two bore holes are provided
for this purpose on the left and right of the back tube, respectively.
Tools:
❒ Allen wrench, size 4
Steps:
1. Hold the bracket for the attendant controls against the back tube.
2. Attach with two Allen head screws.
3. Attach the control panel.
figure 94 Mounting attendant controls on the standard / contour seat
88