Table of Contents
Advertisement
17
[Lights on/off] button
The front and rear lights are activated/deactivated by pressing this button.
When the lighting is switched on, the LED above the button is illuminated.
[Warning flashers on/off] button
All four warning flashers are activated/deactivated when this button is pressed.
[Direction indicator right] and [Direction indicator left] buttons
Pressing these buttons activates/deactivates the respective front and rear direction indicators.
When the function is active, the respective LED above the button is illuminated.
7.12.1.2 Lighting (not intended for road traffic)
The power wheelchair can be equipped with footpath lighting. The installed lighting makes driving on footpaths
easier during hours of darkness. Power wheelchairs with this equipment are not permitted for use in road traffic.
18
7.12.2 Control panel holder
INFORMATION
By default, the control panel is mounted on the side specified in the order. It can also be mounted on the other
side of the power wheelchair later on if the user so desires. Please contact the qualified personnel who delivered
the product to you.
The power wheelchair is equipped with a fixed control panel holder as standard equipment. Alternatively, the
product can be equipped with a swing-away control panel holder.
Swing-away control panel holder
The control panel holder makes it possible to drive the power wheelchair under a table or closer to an object.
The control panel holder can be rotated up to the armrest.
490E163=*
Overview of the lighting push-button module
1
[Direction indicator left] button (with LED dis
play)
2
[Lights on/off] button (with LED display)
3
[Warning flashers on/off] button
4
[Direction indicator right – on/off] button (with
LED display)
Using the lights
Pressing the [Lights on/off] button activates or deactiv
ates the lights (see fig. 18, item 1).
The lighting can be removed by opening the rubber
band (see fig. 18, item 2).
As a rule, the lighting is mounted on the front right side
in the driving direction.
The integrated batteries are charged by connecting the
supplied USB cable to a PC or a battery charger with a
USB connection (battery charger not included in the
scope of delivery).
Use
31
Advertisement
Table of Contents
