General Information; Preface; Support; Safety - Otto Bock C2000 Service Instructions Manual

1 General Information

1.1 Preface
These service instructions describe all regular maintenance tasks as well as repair and re-
placement tasks for the C2000 power wheelchair from Otto Bock. They include all information
required by authorised personnel to correct functional and mechanical defects on components
of the power wheelchair.
The information in these service instructions is essential in order to work on the power wheelchair
correctly and safely. This is why this document, in particular the section "Safety Instructions",
must be read carefully by all persons working on the power wheelchair. This will ensure that all
features of the power wheelchair can be utilised to their full advantage.
The service instructions were prepared based on the DIN EN 62079 standard "Preparation of
Instructions - Structuring, Content, and Presentation". They are divided into 9 sections
The service instructions also contain cross references that make them easier to use, e.g. "see
Section 6.2".
1.2 Support
Your national Otto Bock team will be pleased to answer your technical questions. Contact ad-
dresses and telephone numbers are listed on the last two pages of this manual.

2 Safety

2.1 Symbol Legend
Warnings regarding possible risks of severe accident or injury.
WARNING
Warnings regarding possible risks of accident or injury.
CAUTION
Warnings regarding possible technical damage.
NOTICE
Information regarding operation. Information for service personnel.
INfORMATION
2.2 General Safety Instructions
INfORMATION
Regular maintenance is important. It increases safety and prolongs the service life of the product.
WARNING
Risk of suffocation. Packaging materials must be kept out of reach of children.
CAUTION
Risk of accidents and injury because of failure to observe or comply with the safety instructions.
All safety instructions contained in these service instructions and all other applicable documents must
be observed and complied with. The instructions must be available to personnel entrusted with serv-
ice work at all times.
6