Driving" Parameter Settings - Otto Bock C2000 Service Instructions Manual

8.5.2 "Driving" Parameter Settings

Menu Tree
Input devices
> Hand control device settings
> Driving
> Profile 1 P1
> Forward speed (Fwd
Speed)
Input devices
> Hand control device settings
> Driving
> Profile 1 P1
> Reverse speed (Rev Speed)
Input devices
> Hand control device settings
> Driving
> Profile 1 P1
> Turning speed (Turn
Speed)
Input devices
> Hand control device settings
> Driving
> Profile 1 P1
> Forward acceleration (Fwd
Accel)
114
Access Min Max Default Unit
Service 5 100 20
Service 5 100 20
Service 5 100 10
Service 5 100 20
Help Text
% Maximum forward driving speed
Determines the highest possible for-
ward driving speed at full deflection
when the position of the potentiometer
is set to maximum.
If the position of the potentiometer is
between minimum and maximum, the
highest possible forward driving speed
is scaled linearly.
Ensure the user can operate the wheel-
chair safely at maximum speed.
% Maximum reverse driving speed
Determines the highest possible reverse
driving speed at full deflection when the
position of the potentiometer is set to
maximum.
If the position of the potentiometer is
between minimum and maximum, the
highest possible reverse driving speed
is scaled linearly.
Ensure the user can operate the wheel-
chair safely at maximum speed.
% Maximum turning speed
Determines the highest possible turning
driving speed at full deflection when the
position of the potentiometer is set to
maximum.
The turning speed is normally set to
a much lower value than the forward
driving speed.
If the position of the potentiometer
is between minimum and maximum,
the highest possible turning speed is
scaled linearly.
Ensure the user can operate the wheel-
chair safely at the selected speed.
% Maximum forward acceleration
Specifies the forward acceleration of
the wheelchair when the position of the
potentiometer is set to maximum.
A high value represents a short accel-
eration time and a fast start. High
acceleration values result in abrupt
speed changes and should only be
used in special cases.
If the position of the potentiometer is
between minimum and maximum, the
forward acceleration is scaled linearly.
Ensure the user can operate the wheel-
chair safely at maximum acceleration.