Reinstalling The Battery Cable - Otto Bock C2000 Service Instructions Manual

6.4 Reinstalling the Battery Cable
Preparation:
❒ Remove the seat including seat frame (see Section 6.13.1 and 6.13.5).
❒ Remove the batteries (see Section 6.3.2).
Tools:
❒ Flat screwdriver
❒ Ring or open-end wrench, size 8
❒ Side cutting pliers
Steps:
1. Remove the controller cover.
2. Disconnect the battery cable from the controller.
3. Open the cable ties.
4. Remove the battery cable and replace if required.
Properly reassemble all components upon completion of the work.
figure 12 Battery cable
25