Retrofitting The Arm Strap - Otto Bock C2000 Service Instructions Manual

b) Adjusting the belt length
The belt length can be adjusted on both sides.
1. Position the buckle halves in the middle of the body.
2. After positioning the buckle halves at a right angle in relation to the belt, their position can
be varied.
Any excessive belt length will be held in place by a plastic slide.
figure 62 Adjusting the lap belt

6.13.16 Retrofitting the arm strap

The arm strap is anchored in the arm rest rail.
Tools:
❒ Allen wrench, size 4
Steps:
1. Insert lock cams into the track and position them as desired.
2. Place both strap ends with eyelets onto the set screw and secure with nuts.
Properly reassemble all components upon completion of the work.
figure 63 Arm strap
64