Control Panel Holder; Figure 46 Releasing/Locking The Recaro Seat; Figure 47 Height Adjustment Of Control Panel Holder - Otto Bock C1000 DS Instructions For Use Manual

Figure 46 Releasing/locking the Recaro seat

7.4.2 Control Panel Holder

7.4.2.1 Height Adjustable Control Panel Holder
An optional special control panel holder can be mounted on
the power wheelchair, allowing the height of the control
panel to be adjusted. In order to do so, loosen the attach-
ment screw (see Figure 47) and move the control panel to
the desired height.
C1000 DS
Figure 47 Height adjustment of control panel holder
7.4.2.2 Swing-Away Control Panel Holder
To allow the user to drive the power wheelchair closer to an
object or under the edge of a table, the control panel can be
swung to the side with a special control panel holder (see Fig-
ure 48).
„ Apply slight pressure to move the control panel holder to
the side and release the pivot element.
„ Swing the control panel holder to the side.
„ When bringing the control panel holder back to its origi-
nal position, the pivot element automatically locks into
place.
Accessories
Ottobock 207
|