Otto Bock C2000 Service Instructions Manual page 92

figure 98 Back of the push button module
1 Holes for Torx screws to mount the cover
3. Remove the cover and put it aside.
4. Turn switches on or off as required. Individual functions can be deactivated with these 5
switches (Figure 107, item 1) depending on the configuration (e.g. 4 and 5 off).
figure 99 Push button module connections on the seat module
1 Switch
5. Install the cover
6. Attach the push button module to the holder.
7. Install the fuse.
8. Switch on the control unit.
9. Test the functionality of the push button module.
92
1
1