Standard Seat: Removing The Seat Cushion And Back Pad; Standard Seat: Replacing / Adjusting The Back Upholstery - Otto Bock C2000 Service Instructions Manual

CAUTION
Risk of accidents due to unsecured screw connections. When screw connections with thread locks
are loosened, they must be equipped with new thread locks or secured with a medium-strength thread
lock compound (e.g. Loctite 241®.
CAUTION
Risk of burns in the proximity of fire. The back rest and seat bottom of the power wheelchair are
flame retardant but nevertheless flammable. Therefore utmost caution is required near any sources of
open flame or sparks, especially lit cigarettes.
NOTICE
Risk of damage to seat padding. During any work on the seat, the padding must be adequately pro-
tected against mechanical and chemical damage.

6.13.1 Standard Seat: Removing the Seat Cushion and Back Pad

With the standard seat, the seat cushion and back pad are connected to the seat plate and
back upholstery using hook-and-loop fasteners, which means they can be removed by simply
pulling them off.

6.13.2 Standard Seat: Replacing / Adjusting the Back Upholstery

1. Remove the back pad.
2. Remove the entire back upholstery.
3. Readjust the hook and loop straps according to individual user requirements or remove and
replace if required.
Properly reassemble all components upon completion of the work.
figure 39 Back upholstery, standard seat
48