figure 67
Unlocking and mounting the Recaro® seat
c) Retrofitting seat modules (optional)
The seat bottom of the Recaro® seat module is attached to the seat frame and removed in the
same manner as the complete Recaro® seat. The modular back rest is hooked into the seat
bottom. Two corresponding adapters are found on the seat bottom.
Tools:
❒ Flat screwdriver
Steps:
1. Attach the safety plate to the front adapter.
2. Hook the back rest onto the seat bottom.
3. Attach the front locking mechanism to the rear adapter.
Properly reassemble all components upon completion of the work.
67