Lap Belt - Otto Bock C2000 Service Instructions Manual

6.13.15 Lap Belt

The power wheelchair can be retrofitted with a lap belt as an option.
a) Installing the lap belt
Preparation:
❒ Move the seat up until the corresponding mounting points are freely accessible.
Tools:
❒ Allen wrench, size 5
❒ Open-end or combination wrench, size 13
Steps:
1. Install the mounting kit for the installation of the lap belt on the seat frame using Allen head
screws (right and left sides respectively).
Properly reassemble all components upon completion of the work.
figure 61 Installing the lap belt
63