Seat - Otto Bock C2000 Service Instructions Manual

c) Replacing defective rear direction indicator lights and rear lights:
1. Loosen the screws with a narrow flat screwdriver and remove the protective pane.
2. Remove the defective bulb from the socket and replace it.
Properly reassemble all components upon completion of the work.
figure 37 Removing the rear lights
1 Direction indicator bulb
2 Rear light bulb
figure 38 Replacing the direction indicator bulb
6.13 Seat
WARNING
Risk of accidents and injury due to loosening plug and screw connections. Screw and / or plug
connections have to be loosened for all adjustment tasks. This can cause uncontrolled movements
of wheelchair components. To avoid injuries at pinch and shear points, carry out such tasks with the
support of another person. Make sure to always keep parts of the body (e. g. hands or head) out of
the danger zone.
1
2
47