Otto Bock C2000 Service Instructions Manual page 53

Tools:
❒ Allen wrench, size 5
❒ Open-end or combination wrench, size 13
Steps:
1. Loosen and remove the screw connection on the connecting bracket.
2. Select the corresponding bore in the connecting bracket according to Figure 45 and attach
the connecting bracket.
Properly reassemble all components upon completion of the work.
figure 45 Connecting bracket
figure 46 Installation example SH50/6° (left) and SH50/3° (right): Seat frame - connecting bracket - seat bracket
1 Seat frame
2 Connecting bracket
3 Seat bracket
1
2
3
53