Required Tools And Accessories - Otto Bock C2000 Service Instructions Manual

4 Required Tools and Accessories

Suitable tools and aids for the completion of service tasks are listed below:
❒ Flat screwdrivers, blade widths: 2.5/3.5/5.5 mm
❒ Phillips head screwdriver, size 2 mm
❒ Reversible ratchet handle wrench and sockets, sizes 8 – 20 mm
❒ Ring or open-end wrenches, size 8 – 24 mm
❒ Allen wrenches, sizes 2 – 8 mm
❒ Torque wrench
❒ Socket, size 19 mm
❒ Puller
❒ Pin punch, Ø 3 mm
❒ Plastic hammer
❒ Hand drill
❒ 4 mm drill bit
❒ Tyre lever
❒ Plastic tyre mounting lever
❒ Inner tube repair kit
❒ Side cutting pliers
❒ Circlip pliers
❒ Water pump pliers, gripping width up to 32 mm
❒ Liquid thread lock "medium strength"
❒ Handheld Programming Device
❒ Battery charger
❒ Hoisting devices of sufficient capacity
❒ Jack
figure 6 Tools
17