Stapling Copies (Staple Settings) - Oce CS193 User Manual

3
The Basic screen appears again.
3.12.4

Stapling copies (Staple settings)

Copies can be fed out stapled either in the corner or at two places.
Reminder
Copies can be fed out stapled either in the corner or at two places only when the finisher is installed.
!
Detail
In order for the copies to be stapled, all of the following conditions must be met.
- The paper width must be between 182 mm and 297 mm.
- The paper length must be between 148.5 mm and 431.8 mm.
- If the "Mixed Original" setting is selected, all copies must have the same paper width.
When Finisher FS-519 is installed
Tray
Finishing tray 1
Finishing tray 2
Optional finishing tray
Number of Bound Pages
Examples of the possible number of bound pages are listed below.
- 50 sheets of 90 g/m
- 2 sheets of 209 g/m
- Maximum of 30 sheets of 91 to 120 g/m
3-72
Paper Weight Paper Size
2 2
60 g/m to 90 g/m A3 w to A5 v
(Plain paper)
2 2
60 g/m to 90 g/m A3 w to A5 v
(Plain paper)
2 2
60 g/m to 90 g/m A3 w to A5 v
(Plain paper)
2
paper
2
paper + 48 sheets of 90 g/m
2
paper
Loading Capacity
When the stack is 32 mm high or contains
200 sheets or 20 sets
A4 w or smaller: 132 mm high, 1,000 sheets
or 100 sets
B4 w or larger: When the stack is 64.5 mm
high or contains 500 sheets or 50 sets
When the stack is 24 mm high or contains
200 sheets or 20 sets
2
paper
Basic copy operations
CS193/CS173/CS163