Mfp Stapler Assembly Tamper Drive Belt Removal - Lexmark MB790MFP Service Manual

7462
2. Remove the two screws (A) securing the LED to the cover.
Previous
A
Next
Go Back
3. Remove the LED and disconnect the harness.
4. Remove the LED clear lens.

MFP stapler assembly tamper drive belt removal

1. Remove the tamper recoil spring. See "MFP stapler assembly tamper drive belt removal" on
page 4-209.
2. Pull the belt out the tamper belt holder and remove the belt from the pulley.
4-209
Repair information