Facsimile Co Branch Connection - NEC Univerge SV8100 Features And Specifications Manual

Facsimile CO Branch Connection

Description
The UNIVERGE SV8100 system provides branch connection of locally provided facsimile
machines to CO/PBX lines. Additional dedicated CO/PBX lines are not required for a
facsimile to operate. The facsimile shares any CO/PBX line on the COI Package and Power
Failure (PF) circuit.
Conditions
This function requires a CD-4COTB Blade to connect a facsimile in branch to a

direct CO/PBX line.
A PF circuit is required. The CD-4COTB has PF circuits on the first two ports.

PF and FAX branch connection do not work together at the same port. Select

either way in Program 14-02-21.
For the FAX Branch Line, Incoming Group or DIL should be programmed.

The systems cannot distinguish between an incoming facsimile call and a CO/

PBX call. Incoming call may be automatically answered by FAX Machine.
Ringing assignments should be turned off for fax lines.
When the facsimile is used, the associated CO line key indicates Busy LED on a

multiline terminal.
When the facsimile is not used, the FAX Branch CO/PBX line can be used as an

outside line.
Code restriction does no apply to outgoing calls from the FAX machine.

Connection of the facsimile machine does not require extra system ports.

The PZ-4COTF daughter board does not contain any Power Fail or FAX Branch

Exchange circuits.
Power Fail and FAX CO Branch Connection cannot be used on the same CO

port at the same time.
Program 14-02-21 must be used to set a CO port to use this feature.

Default Settings
None
Facsimile CO Branch Connection
F
2 - 575