NEC Univerge SV8100 Features And Specifications Manual page 852

Issue 5.0
Program
Program Name
Number
31-03-01 Internal Paging Group Settings –
Internal Paging Group Name
 For additional programming information on Paging, refer to the
Operation
Meet Me External Paging Transfer
To make a Meet Me External Paging Transfer:
1. At the multiline terminal, while on a call, press Hold.
- OR -
At the single line telephone, while on a call, hookflash.
2. Press the External Paging Zone key (Program 15-07 or SC 751: 19 + zone or 20 for all external
zones).
- OR -
Dial 703 and the External Paging Zone code (1~8 or 0 for All Call).
- OR -
Dial 1 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for

Internal/External All Call).
3. Announce the call.
4. From a multiline terminal, when the paged party answers, press Transfer or the Transfer softkey.
- OR -
From a single line telephone, when the paged party answers, hang up.
The party is transferred.

To join a Meet Me External Paging Transfer:
1. At the multiline terminal, press Speaker or pick up handset.
- OR -
At single line telephone, lift the handset.
2. Dial 765.
2 - 826
Description/Comments
Assign name to Internal Paging
Groups (i.e., Page Zones). The
system shows the name you
program on the telephone display.
Paging, External
UNIVERGE SV8100
Assigned Data
1
Up to 12 characters
Refer to table in
Programming Manual.
and Paging, Internal features.
Meet Me Paging Transfer
Level
2 3
