NEC Univerge SV8100 Features And Specifications Manual page 1091

UNIVERGE SV8100
Program
Program Name
Number
22-01-04 System Options for Incoming
Calls – DIL No Answer Recall
Time
22-02-01 Incoming Call Trunk Setup
22-04-01 Incoming Extension Ring Group
Assignment
22-05-01 Incoming Trunk Ring Group
Assignment
22-06-01 Normal Incoming Ring Mode
Ring Groups
Description/Comments
A DIL that rings its programmed
destination longer than this time
diverts to the DIL No Answer Ring
Group (set in Program 22-08).
Assign the incoming trunk type (0)
for each trunk. There is one item
for each Night Service Mode.
This option must be set to 0

for Ring Groups to work.
Assign extensions to ring groups.
Assign trunks to ring groups.
Define whether or not an
extension should ring for the
Normal Incoming Ring Mode.
Assigned Data
1
0~64800 (seconds)
(default = 0)
Day/Night Mode: 1~8
0 = Normal
1 = VRS (second dial
tone if no VRS
installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring

for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100

(Incoming Group)
102 (In-Skin/ External
Voice Mail or VM8000
InMail)
(default = 1)
0 = No Ring

1 = Ring
(default = 1)
Issue 5.0
Level
2 3


2 - 1065