NEC Univerge SV8100 Features And Specifications Manual page 1004

Issue 5.0
If Auto Hold in Program 15-02-07 is set to Cut (1), when a user presses the page key while

on a trunk call, the trunk call is put on hold.
A single line telephone can initiate an Internal Zone page, but cannot receive an Internal

Zone Page.
If an internal paging group has only IP Multiline Stations, mutlicast is used for the page. IP

multiline terminals must have a gateway programmed to accomplish a multicast
transmission. When an actual gateway device does not exist on the network, a dummy
gateway address on the same subnet must be defined.
When a paging group contains all IP phones, the page is sent via a multicast message from

the initiating IP phone. If a paging group has IP and TDM phones, when and IP phone
initiates the page, a message is sent to the CPU and the CPU sends the multicast message
for the IP phones.
Default Setting
Enabled
System Availability
Terminals
All multiline terminals
Single Line Telephones
Required Component(s)
None
Related Features
Meet Me Paging
Meet Me Paging Transfer
Paging, External
Programmable Function Keys
2 - 978
UNIVERGE SV8100
Paging, Internal