NEC Univerge SV8100 Features And Specifications Manual page 956

Issue 5.0
Required Component(s)
None
Related Features
Directory Dialing
Single Line Telephones, Analog 500/2500 Sets
Speed Dial – System/Group/Station
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-11-22 Service Code Setup (for Setup/
Entry Operation) – Extension
Name Programming
14-01-01 Basic Trunk Data Setup – Trunk
Name
15-01-01 Basic Extension Data Setup –
Extension Name
2 - 930
Description/Comments
Customize the service code used
to edit Extension Name
Programming.
Set the names for trunks. The
trunk name displays on a multiline
terminal for incoming and outgoing
calls.
Define the extension/virtual
extension name.
UNIVERGE SV8100
Assigned Data
1
MLT
(default = 700)
Up to 12 Characters
Line 001
Line 002
Line 003
:
Line 200
Up to 12 characters
Default:

STA 101 = Ext 101
STA 102 = Ext 102,
etc.
Name Storing
Level
2 3

