Table 2-9 Led Flash Patterns - NEC Univerge SV8100 Features And Specifications Manual

Issue 5.0
Program
Program Name
Number
22-17-03 Dial-In Conversion Table Area
Setup for Time Pattern – End of
Time
22-17-04 Dial-In Conversion Table Area
Setup for Time Pattern – Dial-In
Conversion Table
Number
Operation
DID calls ring extensions like normal trunk calls.
To Activate DID Call by Time Schedule:
1. At any display multiline terminal, press Speaker.
2. Dial the Dial-In Mode Switching Service Code (Default = Not assigned).
- OR -
Press the Dial-In Mode Switching Programmable Function key (Program 15-07-01, 88, or SC 751
Key Code 88).
3. Dial 1~100 (table number).
4. Dial the Time Pattern 1~8.

Table 2-9 LED Flash Patterns

Time Pattern
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Patterns 5~8
2 - 434
Description/Comments
Define the Ending Time for each
DID Translation table in Program
22-17-01.
Assign each time pattern to a DID
Translation Table Entry in
Program 22-11.
LED Appearance
Off
On
Slow Flash
Fast Flash
Off
UNIVERGE SV8100
Assigned Data
1
0000~2359

(Time)
(default = 0000)
0~2000
(default = 0)

Direct Inward Dialing (DID)
Level
2 3